1 000 MW超超临界机组双切圆锅炉NO排放特性的数值模拟.pdfVIP

第29 卷 第32 期 中 国 电 机 工 程 学 报 Vol.29 No.32 Nov. 15, 2009 12 2009 年11 月15 日 Proceedings of the CSEE ©2009 Chin.Soc.for Elec.Eng. 0258-8013 (2009) 32-0012-07 TK 223 A 470 20 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 1 000 MW超超临界机组双切圆锅炉 NO 排放特性的数值模拟 高正阳，宋玮，方立军，孙小柱，陈丹枫，杜文尧 (华北电力大学能源与动力工程学院，河北省 保定市 071003) Numerical Simulation of NO Emission of a Dual Circle Tangential Firing Boiler of a 1 000 MW Ultra Supercritical Unit GAO Zheng-yang, SONG Wei, FANG Li-jun, SUN Xiao-zhu, CHEN Dan-feng, DU Wen-yao (School of Energy and Power Engineering, North China Electric Power University, Baoding 071003, Hebei Province, China) ABSTRACT: The combustion process in a dual circle 关键词：超超临界锅炉；双切圆燃烧方式；NO ；数值模拟 tangential firing boiler of a 1 000 MW ultra supercritical unit 0 引言 was simulated. The effects of stoichiometric ratio, AA air ratio, burner running type and load were analyzed. Simulation and 超超临界机组，由于蒸汽压力和蒸汽温度提 analysis results indicated that dual ellipse shape flow field is 高，热效率比国内现有机组平均水平提高近10%。 formed in the furnace. In the lower part of the furnace, the 因此1 000 MW超超临界机组锅炉，往往采用双切 temperature field is in good synergy with the flow field. 圆方式燃烧[1] 。本文所研究锅炉为一台在建双切圆 However, the synergy of the two fields decrease with increased 超超临界机组锅炉。该锅炉采用三菱先进燃烧技 height; the furnace can be separated into three zones as: NO 术(mitsubishi advanced combustion technology ， density fast increasing zone, NO density fast decreasing zone