利用单端电流的同杆双回线准确故障定位研究.pdfVIP

25 卷 23 期 中 国 电 机 工 程 学 报 Vol.25 No.23 Dec. 2005 2005 年12 月 Proceedings of the CSEE 2005 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2005) 23-0025-06 中图分类号：TM711 文献标识码：A 学科分类号：47040 利用单端电流的同杆双回线准确故障定位研究 索南加乐，王树刚，张 超，陈福锋，宋国兵 （西安交通大学电气工程学院，陕西省西安市 710049 ） AN ACCURATE FAULT LOCATION ALGORITHM FOR PARALLEL TRANSMISSION LINES USING ONE-TERMINAL CURRENT SUONAN Jia-le, WANG Shu-gang, ZHANG Chao, CHEN Fu-feng, SONG Guo-bing (School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, China) ABSTRACT: Based on distributed parameter model, an 该算法原理上不受过渡电阻、系统阻抗、分布电容的影响。 accurate fault location algorithm for parallel transmission lines 并且由于算法只利用电流量，从而不受电压互感器传变特性 is described. Only using one-terminal current, shunt capacitance 的影响。并从理论上证明了测距精度不受电流互感器特性的 and complicated mutual coupling are taken into consideration in 影响。测距方程求解不存在伪根，具有唯一解。仿真计算结 the algorithm. Common components and differential 果表明，该算法具有较高的测距精度，最大测距误差仅为 components are introduced into the algorithm to decouple 0.15%，理论上能够满足高压和超高压输电线路的测距要求。 mutual electromagnetic effect between circuits. Because the differential component network is j ust constituted by parallel 关键词：电力系统；单端电流；同杆双回线；故障测距；反 transmission lines and its terminal voltages are zero, voltage 序电流；分布参数 distribution along differential component network can be calculated by current only. According to the boundary 1 引言 conditions of fault point and the transmission