五电平双降压式半桥逆变器.pdfVIP

第 31 卷 第 24 期 中 国 电 机 工 程 学 报 Vol.31 No.24 Aug. 25, 2011 2011 年 8 月 25 日 Proceedings of the CSEE ©2011 Chin.Soc.for Elec.Eng. 19 0258-8013 (2011) 24-0019-07 TM 464 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 五电平双降压式半桥逆变器 杨伟，洪峰，王成华 (南京航空航天大学信息科学与技术学院，江苏省 南京市210016) A Novel Dual Buck Half Bridge Five-level Inverter YANG Wei, HONG Feng, WANG Chenghua (College of Information Science and Technology, Nanjing University of Aeronautics Astronautics, Nanjing 210016, Jiangsu Province, China) ABSTRACT: A novel dual Buck half bridge five-level inverter 前研究热点[1-2]，如何提高电路可靠性是其中关键问 (DBHBFLI) was presented in this paper, using dual Buck circuit 题。功率器件多、电路结构复杂是影响多电平逆变 as the basic unit to build multilevel inverter. The topology of this 器可靠性的最主要因素。传统桥式多电平逆变器， inverter is different from the traditional multilevel inverters such as flying-capacitor multilevel inverter, diode-clamp multilevel 桥臂上串联了多个功率器件，为维持各个功率器件 inverter and cascade multilevel inverter, and it retains dual Buck 电压均衡，需额外增加大量复杂的钳位电路，特别 half bridge inverter’s (DBHBI) merits of no shoot-through 是随着电平数增加，所需钳位器件数成两倍甚至平 problem, no body diode reverse-recovery problem, and 方关系增长，以 n 电平输出为例，二极管钳位型需 half-period work mode. Compared with traditional multilevel [3] n− 1 个直流分压电容和(n− 1)(n−2)个钳位二极管 ， inverter, clamp circuits are simplified, the complexity of circuit is reduced, and the stability of system is improved. The proposed 飞跨电容型需 n− 1 个直流分压电容和(n− 1)(n−2)/2 inver