交流接触器动态响应不确定性的评价方法.pdfVIP

第 33 卷 第 33 期 中 国 电 机 工 程 学 报 Vol.33 No.33 Nov.25, 2013 130 2013 年 11 月 25 日 Proceedings of the CSEE ©2013 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2013) 33-0130-09 中图分类号：TM 572 文献标志码：A 学科分类号：470·40 交流接触器动态响应不确定性的评价方法 杨怡君，苏秀苹，岳大为，李胜利 (河北省电磁场与电器可靠性省部共建重点实验室(河北工业大学) ，河北省 天津市 300130) Research on Dynamic Response Uncertainty Evaluation of AC Contactors YANG Yijun, SU Xiuping, YUE Dawei, LI Shengli (Province-Ministry Joint Key Lab of Electromagnetic Field and Electrical Apparatus Reliability (Hebei University of Technology),Tianjin 300130, Hebei Province, China) ABSTRACT: There are some differences in dynamic response 类低压电器产品中，是使用面最广的一类产品，它 for AC contactors, even though for three-phase contacts in a 的质量与可靠性至关重要。为此，国内外学者围绕 single test product, for the same contact under the same 交流接触器开展了深入的研究，并取得了一定成 operating condition and for different test product contacts 果。由于交流接触器的动态过程分析对其优化设计 working in the same closing phase angle. Taking CJ20-25 AC contactor as an example, firstly, 9 test products are measured. 非常重要，尤其是触头及铁心的振动弹跳会直接影 The measured 21 dynamic parameters were calculated into one 响其寿命和可靠性，所以已有文献中大部分是围绕 evaluated value by means of fuzzy theory. A single index f uncert 触头吸合过程的动态特性，以及影响触头弹跳次 which came from the coefficient of variance of dynamic 数、幅值等因素展开的。例如文献[1-6]对接触器闭 response was used to evaluate the uncertainty during closing of 合过程进行仿真；王海涛等分析了触头材料对电性 contacts, and it was proved effective and more easier to operate in practice compared with graphic methods