新型多重载波无死区SPWM.pdfVIP

第 34 卷 第 12 期 中 国 电 机 工 程 学 报 Vol.34 No.12 Apr.25, 2014 2014 年 4 月 25 日 Proceedings of the CSEE ©2014 Chin.Soc.for Elec.Eng. 1853 DOI ：10.13334/j.0258-8013.pcsee.2014.12.004 文章编号：0258-8013 (2014) 12-1853-11 中图分类号：TM 46 新型多重载波无死区SPWM 宋崇辉，刁乃哲，薛志伟，孙先瑞，关健宁 ( 东北大学信息科学与工程学院，辽宁省 沈阳市 110004) A Novel Multi-carrier No-dead-zone SPWM SONG Chonghui, DIAO Naizhe, XUE Zhiwei, SUN Xianrui, GUAN Jianning (School of the Information Science Engineering, Northeastern University, Shenyang 110004, Liaoning Province, China) ABSTRACT: The sinusoidal pulse width modulation (SPWM) 该方法的正确性。 plus dead time lowers the system output voltage capability and 关键词：多重载波；死区效应；电流矢量dq 轴滤波；无死 leads to the phase deviation and waveform distortion. A novel 区 SPWM；载波相移时间 no-dead-zone multi-carrier sinusoidal pulse width modulation (NODZ SPWM) was proposed to solve problems caused by the 0 引言 classical SPWM plus dead time and improve current output 正 弦 脉 宽 调 制 (sinusoidal pulse width waveform on the AC side of the inverter. This method uses the multiple carriers to modulate the modulating waves and modulation ，SPWM)方法是一种比较成熟的目前使 generate multiplexed driving signals. Then the current vector 用较广泛的脉宽调制方法(pulse width modulation， on dq-axis is filtered. According to the current direction after PWM) ，广泛应用于数字控制的电压源型逆变器 filtering, some simple logic operations are used to determine 中[1] 。理想 SPWM 方法是基于开关管为理想开关管 the switch-driving signal. This modulation strategy has no 的假设条件下实现的，即开关管能够瞬间导通和关 dead-time eff