无刷励磁同步电机无位置传感器起动控制.pdfVIP

第35 卷 第2 期 中 国 电 机 工 程 学 报 Vol.35 No.2 Jan.20, 2015 2015 年1 月20 日 Proceedings of the CSEE ©2015 Chin.Soc.for Elec.Eng. 477 DOI ：10.13334/j.0258-8013.pcsee.2015.02.028 文章编号：0258-8013 (2015) 02-0477-09 中图分类号：TM 341 无刷励磁同步电机无位置传感器起动控制 钱东祥，魏佳丹，周波，张坤，唐国芬 (南京航空航天大学江苏省新能源发电与电能变换重点实验室，江苏省 南京市210016) Sensorless Control of Brushless Synchronous Machines in the Starting Mode QIAN Dongxiang, WEI Jiadan, ZHOU Bo, ZHANG Kun, TANG Guofen (Jiangsu Key Laboratory of New Energy Generation and Power Conversion, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, Jiangsu Province, China) ABSTRACT: Due to the disadvantages of the complex 步电机起动控制系统的要求，实现电机顺利平稳起动。 structure, low reliability and low utilization rate for the position 关键词：无刷励磁同步电机；变频交流电源系统；无位置传 sensor of the brushless synchronous machine(BSM) used as 感器；旋转高频电压信号；反电势极性判别 starter for the variable frequency AC power system, this paper presented a new sensorless control strategy for the BSM in the 0 引言 starting process. The high frequency rotating voltage signal 飞机变频交流电源系统中由于取消了恒速传 injection method was used in the main generator of the BSM to 动装置，具有结构简单、能量利用率高、兼容性好 detect the initial position of the rotor, and the polarity check by the back-EMF was added for the correction of the initial 等优点，并且能够实现能量的双向流动，具有构成 position of the rotor. In the starting process, the rotor position 起动/发电一体化系统的潜力，因而成为当前大型民 can be calculated by the response current generated by the high 用飞机电源系统的重要发展方向[1] 。 frequency voltage signal, then, it can be used in the vector 无刷励磁同步电机的发电调压控制技术简单 control strategy for the