基于LabVIEW和psoc的心电图测量详解.doc

论文题目：PSOC4的生物电压测试系统 学生姓名： Title: Design of bioelectricity measuring system based on PSoC4 Name: Yang Weiwei Supervisor: Professor Cai Yuanli ABSTRACT Bioelectricity is caused by the changes of potential and polarization of organs, tissues and cells in the biological activities. And a certain physiological processes corresponding to a certain electric response. So we can infer whether the Physiological process of a life is right or not from?the changes of bioelectricity. The information of bioelectricity is of great significance to the diagnosis of the disease in modern medical. More importantly, The ECG (Electrocardiogram) signal is the most important biological electricity, and it have much to do with heart disease, hypertension, obesity and other high risk disease. So ECG is widely used in clinical medicine. Therefore, this paper will research and develop a method to measure the ECG signal. Firstly, the paper introduces the essential knowledge of ECG; then it papers the design of circuits of the analog filters and ECG amplifiers at length. The circuits can effectively enlarge the ECG signal and filter the noise of ECG signal, so that we can get low-noise ECG signal for the acquisition module. Secondly, the thesis states the design of lower position machine by using PSoC4 as the core, and two modules are used. The A/D (Analog-to-digital) conversion module is used to transform the analog ENG signal to digital signal. The UART interface is used to transfer the digital signal to up machine. At last, we use the LabVIEW to design the up machine, which controls the system, receives and processes digital signal, and displays the ECG in the windows finally. The system is made up of down machine and up machine, and the thesis gives a detailed description of the hardware and software design of ECG instrument. KEY WORDS: ECG (electrocardiogram); A/D (Analog-to-digital); UART; PSoC4; LabVIEW  目 录 1 绪论 1 1.1 课题的研究意义与目的 1 1.1.1 课题研究的意义 1 1.1.2 课题研究的目的 2 1.2 心电测量系统的发展