- 4
- 0
- 约9.96万字
- 约 81页
- 2016-11-03 发布于贵州
- 举报
新型广域网后备护研究
摘 要
传统线路后备保护是通过多段式保护的动作时限、动作定值和动作区的相互配
合来实现一定区域间的整体保护。随着电网容量的持续增长、网络拓扑结构的日趋
复杂,给后备保护的定值、时限的配合造成了很大困难。众多大范围的停电事故表
明,保护装置的不正确动作容易导致系统的不稳定运行,甚至造成系统瓦解的严重
后果。随着计算机和通讯技术的发展,广域保护能够很好的解决上述技术难题,它
与传统线路保护不同,通过对广域范围内的故障信息及开关位置信息的采集和综合
分析,能够正确的做出有利于整个系统优化和协调功能的保护动作策略。
论文首先介绍了广域保护提出的背景及其研究现状,论述了广域保护的性能、
功能组成、功能划分和功能结构,在分析了传统保护的局限性的基础上提出了一种
新型的广域网线路后备保护方案,并给出了该方案的研究背景、意义、原理及保护
算法。其中,故障选相采用序电流选相和阻抗元件选相两种,故障定位采用零负序
电流方向元件和阻抗方向元件。文中详细分析了各种选相元件和故障定位元件的工
作原理和保护判据,并给出了具体的故障选相和故障定位方法。
论文提出的广域线路后备保护系统分为保护主站系统和保护子站系统。文中详
细介绍了两部分系统的功能分配,并给出了与各自功能相对应的硬件结构、原理及
其软件设计。在硬件方面给出了广域保护装置采用的各种控制模板的性能及功能实
现,并详细介绍了本系统的硬件核心APCI5000 系列工业控制模板。在软件方面给
出了保护子站系统和保护主站系统的程序设计原理及其程序流程图,并对各部分程
序模块进行了详细的论述。最后,通过动模试验证明了广域保护系统的可行性和正
确性。
关键词:广域保护; 高压输电线路; 后备保护; 微机保护算法
I
Abstract
Conventional line backup protection relays protect a constant area through the
cooperation of the action time, action value and action region. With the increase of the
power system capability and the complicated system structure, it troubles the cooperation
of the protection value and action time. Studies of significant power system incidents
indicate that protection relays are involved in most of the major disturbances, even
making the system breakdown. With the development on computer and communication,
the wide area protection can solve the problem above excellently, it is different from
conventional protection relays, through collecting the fault information and the switch
information, working out the action strategy that is optimized and harmonized.
In the beginning, the background and research situation of the wide area protection
are introduced in this thesis, and then characteristics, fu
原创力文档

文档评论(0)