Fire and ExplosionFireandfir.pdfVIP

Fire and Explosion Hazard Management (FEHM): An Overview Overview of Fire and Explosion Hazard Management Figures Figure 1. Accident Investigation and Causal Analysis Figure 2. Fire and Explosion Incidents: Relationship of Key FEHM Components Figure 3. Understanding Fire and Explosion Mechanics: Fault- Tree-Analysis Diagram based on Ball Energy Model Figure 4. Preventing Fires and Explosions: Understanding the Expanded Fire Triangle Figure 5. Fire and Explosion Hazard Management (FEHM) Process Figure 6. Stages of a Fire and Explosion Hazard Management Process Figure 7. Potential Fire and Explosion Controls Figure 8. Fire and Explosions – Overview of System Dynamics Fire Explosion Hazard Management Diagrams.doc5_DR1 Overview of Fire and Explosion Hazard Management Figures The purpose of the document is to provide a printable version and brief explanation of the diagrams used to develop Industry Recommended Practice IRP 18 – Fire and Explosion Hazard Management. These diagrams were created as part of the work of a Canadian Oil and Gas Industry Committee looking into fires and explosions in the upstream industry. Enform has issued an Industry Recommended Practice prepared by the IRP18 Committee. Further information about this IRP can be found on the Enform website http://www.enform.ca/316. These diagrams were created by Walter Tersmette, P. Eng., as part of his role as the Co-chairman of this industry committee. Figure Discussion 1 Accident Investigation and Causal Analysis One focus of the IRP18 Committee’s work was to identify and analyze relevant fire and explosion case studies. To comple