新型抗拔不抗剪连接件的滑移性能及其滞回模型.pdfVIP

31 卷 11 期 Vol.31 No.11 工 程 力 学 20 14 年 11 月 Nov. 20 14 ENGINEERING MECHANICS 46 文章编号：1000-4750(20 14) 11-0046-07 新型抗拔不抗剪连接件的滑移性能及其滞回模型 聂建国，李一昕，陶慕轩 (清华大学土木工程系，土木工程安全与耐久教育部重点实验室，北京 100084) 摘 要：新型抗拔 抗剪T 型连接件能有效改善组合梁负弯矩区受力性能，该连接件可以保证钢构件与混凝土板 不发生分离，允许两部分产生滑移从而降低传递至混凝土板的剪力，避免混凝土开裂。为研究该新型连接件的滑 移性能，对6 个试件进行了拟静力推出试验。试验结果表明该连接件在较低荷载作用下可以产生较好的滑移效果， 连接件外包泡沫塑料的尺寸对滑移特征影响显著。试验的荷载-位移曲线反映出试件的刚度随加载历史发生了明显 变化，滑移作用引起了曲线的捏拢现 。该文基于Richard-Abbott 曲线提出了针对该新型连接件的滑移滞回模型， 模型参数物理意义明确，并通过试验结果验证了该滞回模型的合理性。 关键词：抗拔 抗剪连接件；连接件尺寸；滑移性能；推出试验；滞回模型 中图分类号：TU398; TU317.1 文献标志码：A doi ：10.6052/j .issn.1000-4750.20 13.05.0422 SLIP PERFORMANCE AND HYSTERESIS MODEL OF A NEW TYPE OF UPLIFT RESTRICTED-SLIP FREE CONNECTORS NIE Jian-guo , LI Yi-xin , TAO Mu-xuan (Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Department of Civil Engineering, Tsinghua University, Beijing 100084, China) Abstract: A new type of uplift restricted-slip free T-shaped connectors can effectively improve the mechanical performance of negative moment regions in composite beams. The connectors can prevent the separation of the concrete slab from the steel beam, reduce the shear force transferred to the concrete part, and delay the cracking of concrete. In order to investigate the slip performance of the new connectors, push-out experiments were conducted on six specimens under low-cycle load, and excellent slip performances were observed. The dimensions of the foamed plastic around connectors significantly affect slip performance. The phenomenon of stiffness changing and pinching is observed from experimental load-deformation hysteresis curves.