一座桥梁研究新平台的静动力试验研究.pdfVIP

30 卷增刊 Vol.30 Suppl 工 程 力 学 2013 年 6 月 June 2013 ENGINEERING MECHANICS 25 文章编号：1000-4750(2013)Suppl-0025-05 一座桥梁研究新平台的静动力试验研究 周 云，易伟建 (湖南大学土木工程学院建筑工程系，湖南，长沙 410082) 摘 要：美国新泽西州的一座四跨简支梁桥被选为Benchmark 模型，作为国际旧桥性能研究和评估的新平台，国 际上近十多所知名高校和测试咨询检测机构对该桥进行了系统的结构静动力试验及无损检测研究。该文简要介绍 了该桥的选择过程和项目的基本情况，对该桥的南侧 2 跨静动力试验结果进行了介绍。动力试验采用多参考点 脉冲锤击法以得到结构的动力模态柔度，静载试验利用卡车进行加载，对比模态柔度下的弯沉与静载试验下的弯 沉显示该方法能为结构损伤识别提供有效的决策支持。 关键词：结构识别；基准模型；脉冲锤击试验；静载试验；模态柔度 中图分类号：TU997 文献标志码：A doi: 10.6052/j.issn.1000-4750.2012.06.S070 THE STATIC AND DYNAMIC TEST STUDY OF A NEW BRIDGE PLATFORM ZHOU Yun , YI Wei-jian (Department of Architectural Engineering, College of Civil Engineering, Hunan University, Changsha 410082, China) Abstract: A 4-span simply-supported beam bridge in New Jersey is selected as a benchmark model, as a new platform for international old bridge performance evaluation and study. More than ten well-known universities and counsulting firms took part in this project and conducted the static test, dynamic test and non-destructive test on this bridge. This paper simply introduces the bridge selection process and the general situation of the proj ect. The static and dynamic test results of the southbound second span of the bridge are presented. Multiple reference impact test is performed to capture dynamic modal flexibility, and the static test is conducted with the dump trucks. The comparison of the deflection using modal flexibility and which from the static load shows this method can provide effective decision support for structural damage identification. Key words: structural identification; benchmark model; hammer impact test; static test; modal