先进格栅增强复合材料结构在软模共固化成型过程中工艺参数研究.pdfVIP

第 28 卷第 4 期 Vol.28 No.4 工 程 力 学 2011 年 4 月 Apr. 2011 ENGINEERING MECHANICS 226 文章编号：1000-4750(2011)04-0226-06 先进格栅增强复合材料结构 在软模共固化成型过程中工艺参数研究 * 黄其忠， 任明法，陈浩然 (大连理工大学工业装备结构分析国家重点实验室，辽宁，大连 116023) 摘 要：先进格栅增强复合材料结构(AGS)软模共固化工艺成型过程是一个包括固化度、温度和应力场等相互耦 合作用的复杂历程，工艺参数的选择将直接影响 AGS 产品的性能。该文以一简单正交 AGS 板为例，采用有限元 分析方法对其软模共固化成型工艺过程进行数值仿真，讨论了工艺间隙、工艺环境和固化制度等对成型工艺过程 中预浸料内部固化度，温度和应力场分布规律的影响，并提出了确定相应的工艺参数的意见。论文工作对 AGS 软模共固化工艺设计具有一定的参考价值。 关键词：软模；共固化；先进格栅增强复合材料结构(AGS) ；数值模拟；多场耦合 中图分类号：TQ320.66 文献标识码：A PARAMETERS STUDY OF SOFT-MOLD AIDED CO-CURING PROCESS FOR ADVANCED GRID STIFFEN STRUCTURE * HUANG Qi-zhong , REN Ming-fa , CHEN Hao-ran (State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian, Liaoning 116023, China) Abstract: The soft-mold aided co-curing process for an advanced grid stiffened composite structure (AGS) is a complex multi-field coupling duration，which includes the temperature, cure degree and stress fields. The product quality of AGS depends on technical parameters determined by the curing environment. Based on the finite element method, a numerical simulation strategy of the co-curing process for an AGS is proposed. The influences of technology gap, curing environment and cure cycle on the distribution of coupling fields in the AGS prepreg are discussed and the determination method of co-curing technical parameters is presented. The present work would be valuable for the technical design of a soft mould aided co-curing process. Key words: soft-mold; co-curing; advanced grid stiffened