梁柱端板连接节点初始转动刚度计算模型.pdfVIP

第26 卷第6 期 Vol.26 No.6 工 程 力 学 2009 年 6 月 June 2009 ENGINEERING MECHANICS 226 文章编号：1000-4750(2009)06-0226-07 梁柱端板连接节点初始转动刚度计算模型 1 * 2 1 吴兆旗 ，张素梅 ，姜绍飞 (1. 福州大学土木工程学院，福建，福州 350108 ；2. 哈尔滨工业大学土木工程学院，黑龙江，哈尔滨 150090) 摘 要：应用组件法建立了端板连接节点初始转动刚度计算模型，考虑了端板受弯、柱翼缘受弯、螺栓受拉、柱 子腹板受剪、柱子腹板受压和柱子腹板受拉变形对连接节点转动刚度的影响。基于板壳理论计算端板和柱子翼缘 的弯曲变形，给出了不同加劲肋设置情况下的刚度计算公式；根据有限元分析结果，把柱子腹板受压刚度计算采 用的有效宽度和EC3 建议的承载力计算有效宽度统一；在计算螺栓刚度时，考虑了因螺栓预拉所挤紧的周围板件 对螺栓变形的影响。该文模型和试验结果及已有模型进行对比，表明该计算模型不仅能精确计算节点的转动刚度， 且相对于现有的分析模型更为简便、准确，便于实际工程中应用。 关键词：端板连接；初始转动刚度；组件法；半刚性连接；板壳理论 中图分类号：TU391 文献标识码：A CALCULATION MODEL OF INITIAL ROTATIONAL STIFFNESS OF STEEL BEAM-TO-COLUMN BOLTED END-PLATE CONNECTIONS 1 * 2 1 WU Zhao-qi , ZHANG Su-mei , JIANG Shao-fei (1. College of Civil Engineering, Fuzhou University, Fuzhou, Fujian 350108, China; 2. School of Civil Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150090, China) Abstract: By employing component method, an analytical model to predict the initial rotational stiffness of steel beam-to-column end-plate connections is set up. It is considered that the connection rotation is mainly induced by the deformation of the end-plate in bending, flange in bending, bolts in tension, column web in shear, column web in compression and column web in tension. The deformations of the end-plate and column flange in bending are estimated in plate-shell theory. Explicit formulae of stiffness are obtained for the end-plate and column flange with di