1毕业设计说明书解析.doc

单位代码 0 2 学 号 1101180035 分 类 号 TH6 密 级 毕业 医用镁合金微丝拉拔工艺研究及拉拔模具设计 院（系）名称 工学院机械系 专业名称 材料成型及控制工程 学生姓名 指导教师 2015年 5 月 10 日 医用镁合金微丝拉拔工艺研究及拉拔模具设计 摘 要 ，，等，，，阻尼系数，，。型铸造、砂型铸造、消失模铸造、熔模铸造、压铸等。压铸是最有市场价值的技术。然而前者靠变形生产尺寸多样的管、型、材板、棒及锻件产品。而且可以靠材料，、、，。 目前，针对医用镁合金微丝的应用研究基本上集中于气道支架、食道支架、胆管支架。 本文以生物可降解镁合金气道支架用微丝加工为背景，根据镁合金优良的材料力学性能和加工性能，对其进行了拉拔成形工艺研究和拉拔模具设计。 关键词：镁合金，微丝，生物相容性，生物可降解，拉拔 Research n Drawing Process and Drawing Die Design of Medical Magnesium Alloy Microfilament Author Abstract Magnesium alloy with magnesium as raw materials of high performance lightweight structural materials, share similar to plastic, stiffness and strength, also as aluminum, strong seismic, electromagnetic, thermal conductivity, excellent properties such as conductivity, and can fully recycled without pollution. Magnesium light quality, its density is only 1.7 kg/m3, is two-thirds of aluminum, steel, about a quarter of the strength higher than that of aluminum alloy and steel, than the stiffness is close to aluminum alloy and steel, able to withstand a certain load, good castability and dimensional stability, easy processing, low rejection rate, good damping coefficient, damping is greater than the amount of aluminum alloy and cast iron, which is very suitable for use in car production, at the same time in the aerospace, portable computers, mobile phones, electrical appliances, sports equipment and other fields has a broad application space. According to different forming process, the magnesium alloy material is mainly divided into two categories: casting magnesium alloy and magnesium alloy. The former mainly through the casting for magnesium alloy products. Include sand casting, permanent mold casting, investment casting, lost foam casting, die casting, etc. The die casting is the most mature and most widely used technology. While the latter is through the deformation of the