- 1、本文档共38页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
LF21防锈铝电阻焊工艺及其接头性能的研究.doc
LF21防锈铝电阻焊工艺及接头性能研究
摘要
电阻焊是将被焊工件压紧于两电极之间,并施以电流,利用电流流经工件接触面及邻近区域产生电阻热效应将其加热到熔化状态或塑性状态,使之形成金属结合的一种方法。电阻焊方法自19世纪末问世以来发展迅速,尤其是随着汽车工业等大批量生产企业的兴起,其应用日趋广泛。
防锈铝依靠其高塑性、低或中等的强度、优良的抗腐蚀性能和良好的焊接性能,在航空和航天工业中获得了广泛的应用,大多用来制造承受中等载荷的零件。
本文研究了板厚为1.5mm的LF21防锈铝合金在电阻点焊过程中电流、通电时间、电极压力等焊接参数对焊接接头性能的影响。利用正交试验法设计试验方案,焊接完成后对焊件进行拉伸试验和金相组织观察,并测量熔核直径及压痕深度、计算焊透率,通过测量及计算出的各项指标来选出最佳的工艺参数组合,同时对接头金相观察中发现的缺陷进行了分析。试验及分析结果表明:在焊接电流为16.4kA、通电时间为0.22s、电极压力为2400N的焊接条件下,焊接各项指标均较好,铝合金表面的氧化膜易导致产生气孔等缺陷。
关键词:电阻点焊;防锈铝;正交试验法
The Research on Resistance Welding Technology and Joints Performance of LF21 Antirust Aluminum
Abstract
Resistance welding is applying load and current on welded artifact between the two electrodes, the current flowing through the surfaces and the neighboring region create resistance heat effect,the base mental is heated to melt or plastic condition, the metal forming a combination of a soldering method. From the nineteenth century resistance welding has been developing rapidly, especially in the car industry and other mass production enterprise of the application.
For high plastic, low or intermediate strength, high corrosion-proof performance and a good weldability, Antirust aluminum have been widely applied to the parts of medium load in the air and space industries.
This study that the current ,the time and the pressure welding parameter to welding joints performance for the slab thickness is 1.5 millimeter antirust aluminum alloy LF21 in resistance spot welding. Make use of orthogonal test to designed experiment, elected parameters units from tensile tests, metallographic analysis and calculation the nugget size, depth of indentation and penetration rate. Then analyzed weldment defect from metallograph and how to produce that defect. Experiment results show the welding conditions that for the current 16.4kA, the tine 0.22s, the pressure 2400N, all of the index was better. The surface of aluminum can easily lead to produce the air hole and other defect.
Key Words: Resistance spot weldin
您可能关注的文档
最近下载
- 新外研版高中英语必修三Unit 3 The world of science Period 1 Starting out & Understanding ideas说课稿.doc
- 项目回款登记表.xlsx VIP
- 《药品记录与数据管理要求》解读.pptx
- 购物广场商场超市消防安全知识培训PPT.pptx VIP
- 油田运输有限公司HSE管理的体系程序文件.doc
- 人教版2022-2023学年二年级数学第一学期期中测试卷(含答案).docx
- 全科医师培训课件.pptx
- 汉字听写大会试题库(附答案).pdf VIP
- 专科医生如何带教全科医生课件.pptx
- 2024小学生汉字听写大会竞赛试题库(附答案).docx VIP
文档评论(0)