ABS微调旋钮成型工艺及模具设计教程.doc

ABS微调旋钮成型工艺及模具设计 摘 要 塑料工业是当今世界上增长最快的工业门类之一，而注塑模具是其中发展较快的种类，因此，研究注塑模具对了解塑料产品的生产过程和提高产品质量有很大意义。本文说明了模具设计的全过程。在对分析的基础上完成了方案的选择，尺寸计算及forming process and die design of ABS tuning knob Abstract Plastic industry is in the world grows now one of quickest industry classes, but injection mold is development quick type, therefore, the research injection mold to understand the plastic product the production process and improves the product quality to have the very big significance. This article describes the fine-tuning knob ABS molding process and mold design process. In the analysis of plastic parts based on the completion of the programs choice, Calculation of relevant size and shape the development process. And use of AutoCAD, the mold assembly plans and important parts of the engineering drawings and other mold. The design is fine-tuning knob of the injection mold, plastic parts use the ABS as a material, Fine-tuning knob used to meet the performance and characteristics of injection molding mold. Design uses a single sub-surface of the mold structure, After cooling in injection molding, injection mold machine drive system dynamic model backwards, Slave mode and will die mold parting surface to separate plastic bag in the punch on the dynamic model together with the retracting, Slave mode and will die mold parting surface to separate plastic bag in the punch on the dynamic model together with the retracting, Rod will also pull material into main channel gating system condensate material pulled out from the gate set, leaving the mold. Injection of hydraulic push plate ejector promote the introduction of institutions to work, Push and pull pieces of sheet material rod and casting plastic parts, respectively, the system condensing material and the cold material from the punch hole in the introduction, Thus complete a vaccination process. While matching a mold, the reset lever to reset the launch of institutions, to prepare the next injection mold. Through this design, inje