基于单片机的太阳能充电器的设计大学本科毕业（设计）论文.docVIP

毕 业 设 计 [论 文] 题 目： 基于单片机的太阳能充电器的设计 学 院： 电气与信息工程 专 业： 自动化 姓 名： 杜XX 学 号： 0924092XX 指导老师： 李老师 完成时间： 2013年06月03日 摘 要 化石能源的日益枯竭、人们对环境保护问题的重视程度也在不断提高，寻找洁净的替代能源问题变得越来越迫切。太阳能作为一种可再生能源它具有取之不尽、用之不竭和清洁安全等特点，因此有着广阔的应用前景，光伏发电技术也越来越受到人们的关注，随着光伏组件价格的不断降低和光伏技术的发展，太阳能光伏发电系统将逐渐由现在的补充能源向替代能源过渡。 使用手机的人都有过这样的经历，外出或旅游时电池突然没电了，因不能及时找到或没有220V市电而无法给手机充电，影响了手机的正常使用。为了解决这一问题，本课程设计介绍一种多用太阳能手机充电器，利用单片机控制，将太阳能经过电路变换为稳定直流电给手机充电，并能在电池充电完成后自动停止充电，还可作为一般直流电源使用，从而摆脱对市电的依赖而获得通信的自由。与常规的充电器相比，太阳能充电器有着明显的优势。 关键词：太阳能电池板，单片机， BUCK变换器，光伏发电技术Abstract Increasing depletion of fossil energy, its emphasis on environmental protection are also rising, look for clean alternative energy issues become more urgent. Solar energy as a renewable energy it has an inexhaustible and clean and safe and so on, so have a broad application prospects, photovoltaic power generation technology is more and more attention, with the PV module continue to lower prices and photovoltaic technology, solar PV systems will gradually supplement the energy from the current transition to alternative energy. People who use mobile phones have had the experience, go out or travel no electricity when the battery suddenly, and because they can not be found or does not timely 220V electricity and not to charge their cell phones affect the normal use of mobile phones. To solve this problem, the course design introduces a multi-purpose solar charger, use MCU control, will transform solar energy through the circuit to stabilize the direct current to charge their cell phones and can charge the battery automatically stops charging after, but also as a general DC power use, so get rid of dependence on electricity obtained the freedom of communication. Compared with the conventional charger, solar charger has a clear advantage. Key words: solar energybattery, single chip, BUCK converte，solar energy目录 摘