基于单片机的led汉字显示屏设计大学生毕业（设计）论文.docVIP

目 录 摘要 2 ABSRACT 31 绪 论 4 1.1 LED 显示屏的研究背景及意义 4 1.2 LED 显示屏的技术现状及发展趋势 5 1.3 论文主要研究内容 5 1.3.1 问题的提出： 5 1.3.2 论文的主要研究内容： 5 2 设计要求 6 2.1原理图设计 6 2.2程序调计 6 2.3 程序调试将设计完的程序输入，汇编，排除语法错误，生成*OBJ文件 6 3 功能要求 6 4 方案论证 7 5 系统硬件电路的设计 8 6 系统程序设计 11 6.1 初始化程序 11 6.2 主程序 11 6.3 显示子程序： 13 6.4 中断服务子程序： 14 7 调试与性能分析 14 7.1 调试与测试 14 7.2性能分析 14 8 控制源程序清单 15 致 谢 18 参考文献 19 论文题目：基于单片机的LED汉字显示屏设计 专 业：应用电子技术二班 姓 名：李志辉 学 号：093001484 摘 要 硬件模块设计方面，主控制系统采用单片机控制方式，实现点阵 LED显示屏的驱动及信息的保存与显示。LED显示点阵主要由LED、及其电路构成。通过单片机的控制驱动电路，采用扫描方式进行显示LED, 点阵字模ABSTRACT LED display is new information shows that the media set microelectronic technology, photonics technology, computer technology, information processing technology in the large-scale integrated display system. With its colorful, wide dynamic range, high-brightness, long life and performance characteristics of stability, widely used in advertising, securities, information dissemination, press releases, and so on. ? This paper was designed based on SCM LED display Chinese characters. By Given system diagram, hardware module design, software, flow charts and procedures, hardware module design, the main control system using SCM control, and dot-matrix LED display driver and the preservation and display of information. LED display lattice mainly by the LED, word-model and its circuit. SCM control through the drive circuit, a scan showed that way. C language software designed to increase the readability of the procedure and portability. In order to facilitate the expansion and changes, the software design is modular structure, so that the logic of relations much concisely. Through the pilot realized the rolling display Chinese characters, achieved the expected results. KEY WORDS: Led，field-array, word-mode 1 绪 论 LED 显示屏是八十年代后期在全球迅速发展起来的新型信息显示媒体，是集微电子技术、光电子技术、计算机技术、信息处理技术于一体的大型显示系统。它以其色彩鲜艳，动态范围广，亮度高，寿命长，工作性能稳定而日渐成为显示媒体中的佼佼者，广泛应用于广告、证券、信息传播、新闻发布等方面，是目前国际上极为先进的显示媒体。 1.1 LED 显示屏的研究背景及意义 在现代信息化社会的高速发展过程中，最具意义的莫过于大屏幕显示已经从公共信息展示等商