自动恒温电热铛控制系统分析报告.docVIP

浙江万里学院 本科毕业设计(论文) (2014届) 论文题目自动恒温电热铛控制系统 (英文)Based on he Electrothermal Dang Automatic Temperature Control System 自动恒温电热铛控制系统 2014年4月摘 要 本课题设计的是一款自动恒温电热铛控制系统，它包括加热电路、控制电路、温度采集电路和液晶显示电路。它是通过按键对电热铛的工作模式进行选择，之后单片机控制继电器使不锈钢加热管开始对底盘开始加热，同时温度采集模块开始对底盘的温度进行采集，单片机获得底盘温度后将其与设定值进行对比，超过设定值关闭加热电路，低于设定值继续加热。使底盘的温度处于设定范围内，为了提高安全性，我们加入了定时器来设定最高工作时间为1小时，要是超过最高设定值没有关闭，则单片机强制关闭电热铛，并驱动蜂鸣器报警。 本系统设计好之后，经过实际操作表明，系统可以根据设置，顺利的完成相应的工作。采用单片机设计的自动恒温电热铛具有结构简单、操作方便、系统稳定、安全性高等优点，自动切断加热模块的功能很大程度上提高了安全性，减少了无人或忘记关电源所引发的火灾。 关键词：；；继电器； Abstract This topic design is an automatic constant temperature heating and control system, it includes the heating circuit, control circuit, the temperature acquisition circuit and LCD display circuit. It is through the buttons on the working mode of electric heating to make choice, single-chip microcomputer control relay after stainless steel heating tube to chassis began heating, at the same time temperature acquisition module began on the acquisition of the temperature of the chassis, single-chip microcomputer for chassis temperature after comparing with the set value, more than the set value closed heating circuit, below the set point to continue heating. Make the temperature of the chassis is in set range, in order to improve the safety, we joined the timer to set the highest working time for 1 hour, if there is no closed more than the highest value is single chip microcomputer closed electric dang, and drive buzzer alarm. This system design, through the actual operation shows that the system can be set according to, and successfully complete the corresponding work. Designed by single chip microcomputer automatic constant temperature heating dang has simple structure, convenient operation, system stability, high security, cut off the heating module function largely improves security, reduces the unmanned or forgot to turn off the power supply caused by fire. Key Words: Con