DS1302+LCD1602实时时钟.docVIP

实验 LCD1602+DS1302实时时钟 一、说明  图1结构图 1、main.c #include SYSTEM.H SYSTEMTIME CurrentTime; unsigned char k = 0; //键值 unsigned char K1,K2,K3,M1,M2,M3,K1J,K2J, K3J,K4J; //键值 unsigned char Set; //调整值 char Set_Mode = 0; void Keysan(void); void delay200ms(void); //主函数 void main(void) { lcd_init(); DS1302_Initial(); lcd_pos(0,0); //设置 Date:显示位置 prints(Date:); //显示 Date:字符 lcd_pos(0,1); //设置 Time:显示位置 prints(Time:); k = 6; //不改变时间 while(1) { Keysan(); //按键检测 DS1302_GetTime(CurrentTime); //获得DS1302时钟数据 DateToStr(CurrentTime); //日期转化成字符 TimeToStr(CurrentTime); //时间转化成字符 lcd_pos(6,0); //控制显示位置 prints(CurrentTime.DateString); lcd_pos(6,1); //控制显示位置 prints(CurrentTime.TimeString); //lcd_pos(7,0); //lcd_wcmd(0x0E); delay200ms(); //延时子程序 } } //键盘扫描 void Keysan(void) { if(～P1_2K1J) { k++; } K1J=～(～P1_2); if(～P1_3K2J) { Set++; } K2J=～(～P1_3); if(~P1_4K3J) { Set--; } K3J=～(～P1_4); if(k == 7) {k = 0; } switch(k) { case 0: DS1302_SetTime(DS1302_SECOND, Set0x3f); break; //设置秒 case 1: DS1302_SetTime(DS1302_MINUTE, Set0x3f); break; //设置分 case 2: DS1302_SetTime(DS1302_HOUR , Set0x1f); break; //设置时 case 3: DS1302_SetTime(DS1302_DAY , Set0x0f); break; //设置日 case 4: DS1302_SetTime(DS1302_MONTH , Set0x0f); break; //设置月 case 5: DS1302_SetTime(DS1302_YEAR , Set0x7f); break; //设置年 default: break; } } //延时200000+0us 函数定义 void delay200ms(void) { unsigned char i,j,k; for(i=201;i0;i--) for(j=32;j0;j--) for(k=14;k0;k--); } 2、DS1302.c # include SYSTEM.H //#ifndef __DS1302_A_H__ //#define __DS1302_A_H__ //引脚及位的定义 sbit DS1302_CLK = P1^5; //时钟引脚 sbit DS1302_IO = P1^6; //数据引脚 sbit DS1302_RST = P1^7; //复位引脚 sbit ACC0 = ACC^0; sbit ACC7 = ACC^7; //函数声明 void DS1302_InputByte(unchar Data); //写入一个字节(内部函数) unchar DS1302_OutputByte(void); //读取一个字节(内部函数) void Write1302(unchar Address, unchar Data); //在指定地址写入指定的数据 unchar Read1302(unchar Address); //读取DS1