离子渗氮对机床齿轮用钢显微组织及性能的影响 大学生毕业（设计）论文.docVIP

离子渗氮对机床齿轮用钢显微组织及性能的影响 摘 要 由于近年来汽车、风电、核电行业的拉动,近年来涉及齿轮加工机床制造的企业也日益增多。齿轮在运行过程中，采用离子氮化工艺利用显微镜组织进行 实验结果表明，离子渗氮后渗氮层的组织为回火索氏体和氮化物，心部组织为回火索氏体。离子渗氮工艺使得机床齿轮用钢获得更高的表面硬度，强度使得机床齿轮 关键词：离子渗氮；显微组织；硬度；耐磨性； ION NITRIDING ON the MICROSTRUCTURE AND PERFORMANCE of the MACHINE GEAR STEEL Abstract Due to the growth of the automobile, the wind power, nuclear power industry in recent years leads to a substantial increase in the demand of gear, which increases the gear processing machine manufacture enterprise. In order to solve the problems of wear, broken teeth, precision decline, frequent replacement of the gear