背靠背变换器的仿真研究大学生毕业设计（论文）.docVIP

毕业设计（论文）  题 目 背靠背变换器的仿真研究 专 业 电气工程及其自动化  背靠背变换器的仿真研究 摘 要 背靠背电压源型变换器在轻型直流输电系统，变速恒频风力发电系统轻型直流输电系统以及电动机变频调速中有着越来越重要的作用。PWM整流-PWM逆变形式的背靠背VSC不仅具有良好的输出性能，更具有良好的输入性能，可获得任意功率因数的正弦输入电流，且具有能量双向流动的良好能力。 了背靠背电压源型变流器在dq同步旋转坐标系下的动态数学模型背靠背电压源型变流器与两端交流系统互联时的功率交换控制原理。设计了基于直接电流控制的双闭环控制器，实现了有功功率和无功功率的解耦控制，基于系统传递函数，采用极点配置的PI参数设计方法，使控制器的期望性能指标与PI参数之间建立了直接的量化关系。 最后，利用PSCAD软件搭建了背靠背VSC变换器控制仿真模型，最终通过对背靠背VSC与两端交流系统的功率交换进行控制仿真，验证了所设计控制器的有效性。 关键词：背靠背电压源型变换器、dq轴解耦控制、直接电流控制 Abstract Back-to-back voltage source converter is becoming more and more important in new fields such as VSCF wind power generator system and HVDC light. back-to-back VSC in the form of PWM rectifier-PWM inverter not only has good output performance, but also has good input performance,and it can obtain sinusoidal input current with any power factor as well as a bidirectional energy flow. The dynamic mathematical model for back-to-back VSC under dq synchronous reference frame is represented as well as the power exchange control principle between converters and two side ac systems.t A dual closed loop controller based on direct current control strategy is designed for active power and reactive power exchange between the converter and two side ac systems, active power control and reactive power control are decoupled. According to the system transfer function, the direct quantitative relationship is established between the desired performance targets and PI parameters based on pole-assignment for PI parameter′s design method. Finally, power exchange control simulation model for back-to-back VSC based on PSCAD is set up, Power exchange control between back-to-back VSC and two side ac systems is simulated, the validity of the proposed controller is demonstrated by the simulation results. Keywords: back-to-back voltage source converter, dq axis decoupled control, direct current control 目 录 绪论…………………………………………………………………1 1.1 选题背景及意义………………………………………………………1 1.2 背靠背VSC的研究现状……………………………………………1 1.2.1 背靠背VSC的应用情况……