USB技术以及医疗设备….docVIP

智能仪表课程大作业 题目： 班　　级： 姓　　名： 学　　号： 指导教师： 开课时间: 2015 至 2016 学年第 1 学期  摘要 USB接口技术又名通用串行总线随着通用串行总线(USB)技术的发展，USB接口优越的传输特性和USB设备的易用性极大地促进了USB技术在各种外设中的应用通用串行总线(USB)具有成本低,使用方便,支持热插拔,传输速率高,功耗低等优点,已被广泛应用于通用串行总线(USB)技术2C等的串行接口和 LPT等并行接口。这些接口方式普遍存在传输速度低和占用系统资源多等较多的缺陷。智能仪器仪表配备 USB接口最简单的方法是采用基于 Window s的计算机,即使用带有标准 USB接口的嵌入式系统主板。但采用这种方案的产品体积大、成本高,智能仪表用户无法接受,因此,更多的时候需要智能仪表的开发者自行设计系统的 USB接口。不断提高的数据传输速度以及稳定性、 易用性等方面的要求都是 RS- 232等传统通信接口所不能满足的,因此USB接口在智能仪器仪表中已逐渐取代老式接口。结果表明该方案在智能仪表USB接口设计中具有实现简单、传输速度快、成本低等优点。分析了USB接口的特点,提出了在智能仪器仪表接口设计中使用USB接口的一种方案应用 Also known as universal serial bus USB interface technology, with the development of universal serial bus (USB) technology, the transmission properties of the USB interface is superior and the USB device usability greatly promote the application of USB technology in a variety of peripherals, universal serial bus (USB) with low cost, easy to use, support hot plug, high transmission rate, low power consumption advantages, has been widely applied to various fields in the real life, has the very vital role. Universal serial bus (USB) technology in the intelligent instrument has been widely used. At present, intelligent instrument interface design is an important part of the whole design process. At present, the commonly used in intelligent instrument interface RS - 232, RS - 485 serial interface, I2C, etc and LPT parallel interface, etc. Way of these interfaces are widespread transmission speed is low and occupies system resources more and more defects. Intelligent instrument equipped with USB interface based on the simplest method is to use Window s computer, using embedded system motherboard with standard USB interface. But the product of this scheme large volume, high cost, intelligent instrument users cannot accept, therefore, it needs to be more intelligent instrument designed by the developer of the USB interface of the system. To improve data transmission speed and meet the requirements of the stability, ease of use is the tr