年产490万吨热轧板带钢车间工艺设计（本科）毕业设计论文.docVIP

年产490万吨热轧板带钢车间工艺设计 摘要 -A，2.5 mm1400mm。主要设备有三台步进式加热炉，一台粗轧除鳞机，一架四辊可逆粗轧机（5000吨），六机架四辊精轧机组(3架CVC轧机和3架PC轧机)，三台卷取机，及各种附属设备。设计以年产量为基础，结合各产品的市场前景合理地分配各产品的产量，制定产品方案和金属平衡。以典型产品为例，制定了工艺流程和压下制度、速度制度、温度制度、辊型制度等，并校核了轧机生产能力，计算了各项经济技术指标，绘制了一张车间平面图。在专题中详细论述了铝及铝合金种类,生产工艺及应用。 关键词：热轧带钢；； Annual output of 4.90 million tons of hot rolled flat steel plant process design Abstract Lots of metal materials are being used in country’s economic constructions, steel makes up a big proportion,The product of steel strip are widely produced and used because of its special superior function.As its industrial art get close to maturity and provide cold rolled steel strip with raw material of excellent quality,which satisfy requirements of people’s lives. Refering to the 2150 Hot Rolling Strip Steel Plant of An Steel, the designed plant has an annual capability of 4.90millions tons for typical product of Q345-A, 2.5 mm1400 mm. The maojor facilities include: three walking beam furnaces, one descaling machine for rough rolling, one 4-roll reversing blooming mill (5000 tons), one 6-stand and 6-roll finishing mill group (3 Continuously Variable Crown rolling mills and 3 Pair Cross rolling mills), three coilers, and appurtenances. Considering market prospect, the yield, product scheme, and metal balance of each kind of product are appropriately designed based on the annual plant capacity. For the typical product, the process flow diagram, depressing systerm, velocity system, temperature system, and crown systerm, etc. are determined. Furthermore, the production capacity of the rolling mill is checked, the economic and technical norms are cauculated, and a plane figure for this workshop is drafted. In the chapter of special topic, The species，industrial arts and use of aluminum and it discussed in detail. Key words: hot rolled steel strip, depressing schedulel, aluminum and its alloy, species and use  目 录 摘 要 I Abstract II 1综述 1 1.1热轧板带的发展史 1 1.2热轧及热轧的现状 2 1.2.1热轧定义 2 1.2.2热轧工艺优点 2 1.2.3热轧工艺不足之处 2 1.2