移动通信技术GSM篇()教案分析.ppt

* * * * * * * * * * * * * * * * * E.164:86139 H0H1H2H3ABCD E.212:46000 H1H2H3SXXXXXX E.214:86139 H0H1H2H3SXXXXXX * * * * * * * * * * * * * * * * * * * * * * * * * * FACCH BTS 0 1 2 3 4 5 6 7 TS Frequency correction Synchronization Broadcast control Access request Subscriber paging Answer to Access request Dedicated Signaling Sys InFo 5, 6 + SMS Traffic (speech data) Associated Signaling MS Traffic (speech-data) Associated Signaling Radio Measurement + SMS Dedicated Signaling Broadcast info Access request Subscriber paging Answer to Access request M.S. Pre-synchronization Broadcast info FCCH SCH BCCH PCH AGCH CBCH SDCCH SACCH TCH TCH FACCH SDCCH SACCH FCCH SCH BCCH RACH PCH AGCH RACH CBCH The Logical Channels on Radio Interface FACCH MESSAGES Connection establishment from SDCCH to TCH End validation of a SDCCH-TCH commutation Characteristics of the future used BS after handover Connection establishment to BS after handover Validation of an handover SACCH MESSAGES System Information 5, 5bis, 5ter and 6 (connected mode) Measures: power level of the communication quality level of the communication level on the beacon frequency of the neighboring cells Timing Advance Power Control TCH MESSAGES Full rate speech at 13 kbit/s Half rate speech at 6.5 kbit/s Full rate data at 9.6, 4.8, or 2.4 kbit/s Half rate data at 4.8 or 2.4 kbit/s Handover Access message (uplink) SDCCH MESSAGES Request for a SDCCH assignment Request for the end of channel assignment Order of commutation from SDCCH to TCH Logical Channel Description (1/2) CBCH MESSAGES Specific information For example: weather road information FCCH MESSAGES no message is sent (all bits 0) BCCH MESSAGES System Information type 1, 2, 2bis, 2ter, 3, 4, 7, 8 (idle mode) SCH MESSAGES Frame Number Base Station Identity Code (BSIC) AGCH MESSAGES For dedicated channel assignment: frequency number slot number frequency hopping description Timing Advance (1st estimation) MS identification PCH MESSAGE