基于环形转盘发泡生产线的控制系统设计大学毕设论文.docVIP

毕 业 设 计 设计题目：基于环形转盘发泡生产线控制系统设计 系 别： 班 级： 姓　 　名： 指 导 教 师： 2015年5月27 日 基于环形转盘发泡生产线控制系统设计 摘 要 作为汽车的重要组成部分，汽车内饰件质量的高低直接关系到乘坐人员的舒适性及汽车的整体性能。由于汽车内饰件的工艺复杂，目前我国大多数生产企业技术装备落后，自动化程度低，产品质量不稳定。如何提高汽车内饰件的生产技术是一个刻不容缓的研究课题。 通过分析内饰件成型生产线的机械结构、主要组成部分、生产工艺流程，提出了生产线控制系统的要求。利用 STEP7 软件对生产线 PLC 控制系统进行模块化程序设计。另外为了控制和反应系统的工作状态及运行状态，设计中还使用TIA portal软件为该控制系统制作了人机交互界面。TP1200型触摸屏的应用可以使控制系统的运行过程得到直观监控,提高了控制状态的可监测性。 环形转盘发泡生产线控制系统采用分级结构。第一级为可编程逻辑控制器(PLC)，系统选用SIEMENS S7-200，与现场行程开关和仪表连接，主要完成对现场数字信号进行采集和处理以及对执行元件进行实时控制的功能。第二级为工业控制计算机(IPC)，主要完成控制软件的界面和控制过程数据的监视、管理和记录的功能。 关键词：汽车内饰件 控制系统 生产工艺流程 PLC The Design on Control System for The Rotating Foam Production Line Abstract As an important part of the automobile., the quality of Automobile interior parts is directly related to the comfortable sensation of the passengersand the overall performance of the automobile.Because of the complex technology of the Automobile interior parts production, there are many drawbacks, Such as behindhand technical equipments, rare application of automation, instable product quality, etc. How to improve the production technology of interior parts becomes an urgent research project. By analyzing the physical construction, main composing and production process of interior parts’ molding production line in this paper. And requirements are also presented. The device hardware of the production line PLC control system is carried out by using STEP7 software. In addition to control and response system working state and running state, the design also uses the software of TIA portal for the control system produced a man-machine interface. The using of the TP1200 type touch screen while the application of the control system can also be visually monitored during operation and improve the control of the state can be monitored. The Rotating foam production line control system adopts a classification structure. The f