毕业论文-基于FPGA的自动售货机控制器设计.docVIP

大连海事大学 毕 业 论 文 　 　　基于FPGA的自动售货机控制器设计 二○一四年六月 摘要 FPGA的自动售货机控制器的软件设计，此自动售货机控制器包含八个大模块：购物模块，定价模块，投币模块，比价模块，计时模块，复位模块，购物显示模块以及数码管显示模块。投入钱币并通过键盘选择后再经比价处理模块，将对应的出货找零信息通过LED灯和数码管显示模块反映。 本设计借助于VHDL语言来编程实现八个模块的基本功能，在Quartus II软件ZY11EDA13BE实验系统中完成自动售货机的功能实现，通过开关、键盘等完成购物请求、投币等操作，通过数码管及指示灯显示系统运行结果，从而可以更清晰地观察到自动售货机的运行情况。 关键词：自动售货机控制器；EDA；FPGA；QuartusII；VHDL ABSTRACT With the rapid development of science and technology as well as peoples living standards rise day by day. As a representative of commercial machinery automation vending ,the vending machine business is widely used in public places ,has bought great convenience to peoples lives. This paper describes the software design and hardware design based on FPGA vending machine controller, the vending machine controller module consists mainly of eight modules: shopping module, price module, coin module, timing module, price comparison module, reset module, shopping display module and digital display module. After parity processing module for selected commodity prices and the amount of investment comparison, the corresponding change information delivery through LED lights and the digital display module display. This design using VHDL hardware description language programming to describe the basic function of eight modules. Performed on the Quartus II software platform for design, compilation, integration, optimization, simulation and ultimately the resulting object files downloaded to the target FPGA chip. Completing the realization of the function of the vending machine in the ZY11EDA13BE experimental system. Coin, shopping request through the switch, keyboard and the other operations. Through digital tube and light display system running result, which can be observed more clearly the vending machine operation. Keywords: vending machine controller; EDA; FPGA; QuartusII; VHDL 目录 第1章 绪论 1 1.1自动售货机的起源 1 1.2自动售货机的现状与发展 1 1.3自动售货机的研究方向 2 1.4课题研究任务 2 1.5 本章小结 2 第2章 开发设计基础 3 2.1 EDA技术简介 3 2.2 FPGA简介 3 2.3 VHDL语言概述 4 2.3.1 VHD