基于开环检测系统的全光纤电流互感器的研究.pdfVIP

43 卷 5 期 红外与激光工程 2014 年5 月 Vol.43 No.5 Infrared and Laser Engineering May 2014 基于开环检测系统的全光纤电流互感器研究 李建中，李泽仁，张登洪，温伟峰，田建华，王荣波 ( 中国工程物理研究院流体物理研究所，四川 绵阳 621900) 摘 要 商用化的全光纤电流互感器(FOCT) 的误差一般要求小于0.2% ，信号处理方法是决定该类传 感器测量准确度的关键因素。论述了全光纤电流互感器的光路结构、工作原理、技术优势和干涉信号 特征，提出了一种基于数字开环的全光纤电流互感器检测系统以及实现方案，论述了其工作原理和特 点，试验结果表明，该检测方法提高了全光纤电流互感器的性能，使其满足了0.2 级测量用电子式电 流互感器的准确度要求, 对解决全光纤电流互感器的信号处理、测量准确度和测量灵敏度等问题具 有较大的参考价值。 关键词 全光纤电流互感器； 开环检测； 方波调制； 法拉 效应 中图分类号 TP212.14 ；TN911.7 文献标志码 A 文章编号 1007-2276(2014)05-1648-06 Open loop detection of fiber optic current transducer Li J ianzhong, Li Zeren, Zhang Denghong, Weng Weifeng, Tian J ianhua , Wang Rongbo (Institute of Fluid Physics , Chinese Academy of Engineering Physics , Mianyang 621900 , China) Abstract: The error of commercial fiber optic current transducer (FOCT) must be less than 0 .2% , the signal processing is a key factor for high鄄accuracy current sensing. The topology , operational principle, technical advantage, signal characteristics of fiber optic current transducer was introduced . A new scheme based on digital open鄄loop detection for the measurement system of the FOCT was presented, the working principles and features of this design were analyzed . The experimental results show that the FOCT 忆s measurement precision is improved by using the improved measurement system, and the FOCT can satisfy the accuracy requirements of the 0 .2 class measuring electronic transducer, meeting the requirements of digital substation, so it is valuable for solving a great deal of problems, such as the signal processing, measurement accuracy , measurement sens