海洋钻修机模块载荷工况分析brAnalysis on Load Project of Ocean Well Servicing Module.pdfVIP

Mechanical Engineering and Technology 机械工程与技术, 2015, 4, 159-172 Published Online June 2015 in Hans. /journal/met /10.12677/met.2015.42017 Analysis on Load Project of Ocean Well Servicing Module 1,2 1,2 2 1,2 1,2 Peng Cheng , Quanxing Li , Gangqiang Liu , Suina Yan , Chenchen Lai , Peng Yang1,2 1 National Oil and Gas Drilling Equipment Research Center, Baoji Shanxi 2 Baoji Oilfield Machinery CO., LTD, Baoji Shanxi Email: cp_xyh@126.com th rd th Received: Jun. 4 , 2015; accepted: Jun. 23 , 2015; published: Jun. 29 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract Aiming at 2250kN ocean well drilling and servicing desktop module which is made during QHD32-6 project, the article analyzes working condition with ANSYS finite element calculation, explains the specifications and requirements which are involved in the analysis and calculation of each working condition, and construes the possible problems in calculation, then forms reliable and reasonable load case analysis lists that provide the core basis for the following finite element calculation. Keywords Ocean Well Drilling and Servicing Module, ANSYS, Finite Element Analysis, Load Case Analysis 海洋钻修机模块载荷工况分析 1,2 1,2 2 1,2 1,2 1,2 程 鹏 ，李全星 ，刘刚强，颜岁娜 ，赖晨晨 ，杨 鹏 1 国家油气钻井装备工程技术研究中心，陕西 宝鸡 2宝鸡石油机械有限责任公司，陕西 宝鸡 Email: cp_xyh@126.com 收稿日期：2015年6月4 日；录用日期：2015年6月23 日；发布日期：2015年6月29 日