热等静压和热处理对快凝NiAl--Cr(Mo)--Hf共晶合金显微组织和压缩性能的影响.pdfVIP

45 9 Vol.45 No.9 2009 9 1025—1029 ACTA METALLURGICA SINICA Sept. 2009 pp.1025–1029 NiAl–Cr(Mo)–Hf ∗ (, 110016) NiAl–Cr(Mo)–0.5Hf , Hf Hf , Heusler (Ni AlHf) Hf , . , 2 Heusler Hf , Heusler Hf NiAl , NiAl . . NiAl–Cr(Mo)–Hf , , , , TG113 A 0412−1961(2009)09−1025−05 EFFECTS OF HIP AND HEAT TREATMENT ON MICROSTRUCTURE AND COMPRESSIVE PROPERTIES OF RAPIDLY SOLIDIFIED NiAl–Cr(Mo)–Hf EUTECTIC ALLOY SHENG Liyuan, GUO Jianting, ZHANG Wei, XIE Yi, ZHOU Lanzhang, YE Hengqiang Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 Correspondent: GUO Jianting, professor, Tel: (024 E-mail: jtguo@imr.ac.cn Manuscript received 2008–12–03, in revised form 2009–04–16 ABSTRACT The NiAl–Cr(Mo) eutectic alloy has better fracture toughness and high temperature strength among NiAl alloys. Hf addition can raise the high temperature strength of NiAl–Cr(Mo) eutectic alloy further, but decreases its room temperature compressive properties obviously, which is caused by the microsegregation of Heusler phases. The NiAl–Cr(Mo)–0.5Hf alloy was rapidly solidified and then hot isostatic pressed (HIP) or high temperature treated (HTT) in order to improve the structure and property of this eutectic alloy. The results reveal that rapid solidification can well refine the microstructure of eutectic alloy and keep more amount of Hf solid solution phase in the alloy. Simultaneously, the shapes and distributions of the Heusler (Ni2AlHf) phases and Hf solid solution phases are well improved. After the HIP treatment, more