钢筋调直机 钢筋切断机型号 圆钢切断机课程.docVIP

钢筋调直机 邢台沣田机械有限公司 网址： 联系电话：0319-5234022 钢筋调直机产品说明： 钢筋调直机适用于予制构件厂、钢筋加工配送厂及建筑施工场地对盘条或冷拔钢筋的调直切断。钢筋调直机 又名直丝机，该机结构是由高速转子旋转调整直丝模角度，达到调直的效果。具有调制效果好，切断准确、简单易学、结构合理，操作方便安全、切口齐、误差小、性能好等特点。直丝长度可根据客户要求随意确定。本机器适用材质有不锈钢丝、铝丝、冷拔丝、包塑料皮钢丝等。钢筋调直机结构合理，稳定可靠，操作简洁，自动化程度高，操作人员可同时管理多台机器，极大地提高了生产效率，是五金、网线等生产厂家必备的专用设备。 钢筋调直切断机特点 易拆解，搬运安装方便，设有数控装置，可根据客户不同要求、数量、长短定位。调直速度快，切断无误，无噪音，无连切，可调直Φ4-Φ14盘圆钢筋与Φ4-Φ12级螺纹钢筋，适用于各种建筑工地与钢筋加工。 钢筋调直切断机功能： 切断钢筋长度无误差， 双头牵拉式， 最后一米钢筋调完拉出为止， 建筑丝采用钨钢模， 产品丝采用球末模，调出的钢筋不会伤害表面。 钢筋弯箍机钢筋调直机结构合理，稳定可靠，操作简洁，自动化程度高，操作人员可同时管理多台机器，极大地提高了生产效率，是五金、网线等生产厂家必备的专用设备。钢筋弯箍机钢筋弯箍机钢筋弯箍机Acknowledgments The authors would like to thank Johns Hopkins University for the TC-1 cells. This work was supported by a National Health Research Institutes intramural grant (IV-103-PP-22) and grants from the National Science Council, which were awarded to Y.C. Song (NSC 99-2321-B-400-004-MY3) and S.J. Liu (NSC 103-2321-B-400-008). Author Contributions Y.C.S. and S.J.L. designed the studies. Y.C.S. performed the research and analyzed the data. Y.C.S. and S.J.L. wrote the manuscript. Additional Information C57BL/6 mice were immunized subcutaneously (s.c.) once with 1 μ g of peptide mixed with or without 10 μ g of CpG adjuvant. After one week, splenocytes were harvested, and the response of IFN-γ -secreting cells was determined by ELISPOT after 48 h of peptide stimulation. Briefly, 2 × 105 splenocytes were incubated with 1 μ g/ml irrelevant peptide or RAH peptide in an anti-IFN-γ -coated polyvinylidene fluoride (PVDF) plate for 48 h. After incubation, the cells were removed, and a biotinylated anti-IFN-γ Ab (eBioscience, San Diego, CA, USA) was added to each well. The plates were incubated at 37 °C for 2 h. Following the addition of the avidin-HRP reagent (eBioscience, CA, USA), the assay was developed using a 3-amine-9-ethyl carbazole (AEC; Sigma-Aldrich, MO, USA) staining solution. The reaction was stopped after 4–6 min by placing the plate under tap water. The spots were counted using an ELISPOT reader (Cel