PROE油缸实体造型 毕业论文.doc

摘要 启闭机用于各类大型给排水、水利水电工程。用于控制各类大、中型铸铁闸门及钢制闸门的升降达到开启与关闭的目的。液压启闭机，卷扬启闭机，门机，手轮启闭机，手摇启闭机，螺杆式启闭机等。目前的三维造型软件领域中占有着重要地位，并作为当今世界机械CAD/CAE/CAM领域的新标准而得到业界的认可和推广，是现今最成功的CAD/CAM软件之一Abstract Hoister are used for all kinds of large Water and Wastewater Engineering, water conservancy and hydropower projects.Used for controlling all kinds of big, medium-sized iron gates and steel gate lifting which can achieve the purpose of opened and closed. Hoist according to type into hydraulic hoister, roll Yang hoister, door machine, the handwheel hoister, hand operated hoister, screw headstock gear. Because of the hydraulic hoister existing a limit in design and manufacture of precision and materials etc, so now basically used 3-d graphics software design and assembly of the hydraulic hoister each parts.With the 3d drawing technology becoming perfect and mature, 3d technology palyed a pivotal role in the engineeringof a repair and design area. Pro/E namely as a super 3d drawing software, the three-dimensional modeling software occupies an important position field, and as the world mechanical CAD/CAE/CAM domain the new standards and have been recognized and promotion, is now the most successful one of CAD/CAM software, got public recognition. This thesis mainly describes how to use the software Pro/E to complete each parts of oil cylinder drawing and assembling into entity. Through the analysis of two-dimensional drawing by CAD, access relevant information , useing the parts module and assembly software design of Pro/E for parts modules and parts assembled into complete entities, applied to the main design various ways, such as using the rotating cylinder of the disk type and characteristics such as the axis of symmetry with a single round parts operate. Design comprehensive use of mechanical design basis, mechanical drawing, mechanical manufacturing base in Pro/E, build on the platform of the hydraulic hoister carry on the omni-directional design and assembly, and may through the modificati