外文图纸要求BT丝锥攻丝的要点详解.pdf

外文图纸要求BT丝锥攻丝 的解决方案 搜集整理 施必牢BT丝锥和塞规选择案例 图 纸 具体要求 施必牢BT丝锥和塞规选择案例 Spiralock 样本 施必牢BT丝锥和塞规选择案例 螺纹塞规一套 根据材料选用不同丝锥 三种全要买 施必牢BT丝锥种类说明 General Purpose: This style tap is the basic tapping tool of the industry and can be used to tap most materials. For high production applications this basic style is best used for tapping tough steels, stainless steels and bronze (except the free-cutting grades of bronze or brass). The plug chamfer is the most widely used; the 2 ½ threaded chamfer is recommended for cast iron, and the bottom is used for tapping full threaded blind holes. 通用型：这种风格的丝锥的基本攻丝工具的在行业中，可以用来攻丝大 多数材料。高产量应用这一基本风格是最好的用于攻丝坚韧的钢，不锈 钢和铜（除易切削牌号的青铜或黄铜）。插头倒角是最广泛使用的；2螺 纹倒角½推荐用于铸铁，和底部用全螺纹盲孔攻丝。 施必牢BT丝锥种类说明 T10 Style Tap: This style was developed by Spiralock engineers for lead screw controlled high production tapping of all grades of cast iron and other abrasive materials. T10 taps are given a special surface treatment that creates an extremely hard and abrasion resistant finish. T10类型丝锥：这种类型的丝锥是由的施必牢工程师开发了丝杠控制的 高生产各种牌号的铸铁和其他研磨材料攻丝。T10丝锥给出了一个特殊 的表面处理，加工一个非常硬的和耐磨的加工。 施必牢BT丝锥种类说明 SA Style Tap: This tap style is recommended for tapping tough space alloy materials, hence the initials SA. It is similar to our T10 style taps with the exception that SA Style taps are not surface treated. SA类型丝锥：这种丝锥被推荐用于攻丝难加工合金材料，因此缩写SA 。 它类似于我们的T10类型丝锥 除了SA类型不进行表面处理的丝锥。 施必牢BT丝锥种类说明 Spiral Point: These taps have a spiral point grind t