CFRP和钢材的粘结性能试验的研究.pdfVIP

## CFRP 1 1 1 1 2 彭福明 才 鹏 张 宁 张新山 刘宝喜 ( 11 , 100088; 21 , 266510) : , CFRP CFRP , CFRP , , CFRP : 3 CFRP , , , , : ; ; ; ; ; EXPERIMENTAL RESEARCH ON THE BOND BEHAVIOR OF CFRP TO STEEL 1 1 1 1 2 Peng Fuming Cai Peng Zhang Ning Zhang Xinshan Liu Bao i ( 11China Jingye Engineering Corporation Limited, Beijing 100088, China; 21Qingdao Jinmaoyuan Steel Work Engineering Co. , Ltd, Qingdao 266510, China) Abstract : There are several advantages of adhesively bonded carbon fiber reinforced polymer ( CFRP) laminates to strengthen deteriorated steel members over traditional retrofit methods. The bond behavior of CFRP to steel affects their load transfer and the effectiveness of strengthening , but there was no research on this subject in China. The suitable adhesives for steel structures strengthening with CFRP were selected from many adhesives. Appropriate specimens were fabricated to test the bond strength and bond durability between CFRP and steel. T est results showed that the properties of adhesives Araldite 2015, Sikadur 330 and Tyfo MB were e cellent and they were suitable for steel strengthening with CFRP. Tensile tests of steel plates repaired with CFRP sheets were conducted and the tensile strains of CFRP sheets were measured. The bond stress distribution between CFRP sheets and steel plates and effective bond length of CFRP sheets were obtained. The computed results using the formulas are in good agreements with the e periment data. Keywords : material selection; bond strength; bond durability; hot-wet cycle; bond stress; effective bond length ,