洗衣机上盖模具数控编程与加工毕业论文.docVIP

摘 要 塑料制品的，有价格低，性能。它在笔记本及电脑、手机、汽车、电机、电器、各类仪器仪表、家电不可替代的作用，应用广泛。本次的毕业设计主要研究洗衣机上盖的模具设计，首先通过市场调查，确定目前的市场需求及消费群体，对产品进行定位，初步进行拟定几个方案，并画出草图，其次对几个设计方案进行合理性分析，确定最终的实行方案，根据使用要求进行确定尺寸的大小，画出三视图和效果图。，塑料料筒中进行加热熔化，高黏度的流体，再使用加压工具螺杆或柱塞，以高压的方式塑料熔体喷嘴注入到模具的型腔中，进行冷却、凝固，从模具中脱出，。该产品设计为大批大量生产，故设计的模具应有高效率的特点，浇注系统自动脱模，表面质量我们采用点浇口，塑模单分型面，点浇口自动脱模结构。模具型腔的为一模一腔，推杆推出机构推出形式完成塑件的推出。工艺性能要求塑件的注塑模中冷却系统，在模具的设计也进行了设计。 关键词： Abstract Plastic material supply is very large, and its advantages are: low prices, good performance. It in communications products in the manufacture of notebook computers, mobile phones, cars, motors, electrical appliances, all kinds of instruments and meters, household appliances has an irreplaceable role, and the application is very extensive. This graduation design is mainly research on the washing machine cover mold design, first of all, through the market investigation, to determine the current market demand and consumer groups, on product positioning, to draw up a few preliminary scheme, and draw sketch, secondly the rationality analysis of several design schemes, determine the final plan, determine the size of the size, according to the needs of using draw three view drawing and rendering. Method to carry on the design of this use of injection molding, the use of this method is to put the plastic raw material heated to melt in the cylinder, when plastic is the high viscosity fluid, and use tools such as screw or plunger pressure tool, the use of plastic melt in the form of high pressure by the nozzle into the mold cavity, and then carries on the cooling and solidification, the final step in the process of the product out of the mould, as produced by the products. This product design for a large number of mass production, so the design of the mold should have the characteristics of high efficiency, products in the middle of the pouring system can automatic stripping, and the purpose is to make sure we are processing the surface of the product quality with the method of poi