入场安全培训教材详解.ppt

* Crane operation should be compliance with the National related regulations and crane safety operation procedure to prevent person injury, death and damage to the equipment, plant nearby. Key Points: Qualified operator, rigger and flagman Crane inspection checklist Crane lifting working Plan Wire slings and auxiliary equipment inspection Outriggers full extended Dragline Overhead power line Ground condition and pad Barricade working area( Rotation semi diameter) * The placement of a tag and lock on an energy isolating device (for example, valve, disconnect switch, circuit breaker) to indicate that the equipment / system being controlled may not be operated until the tag and lock are removed. Push buttons, selector switches and other control circuit type devices are mot energy isolating devices. Obey relative Lockout and Tag-out procedure and regulation. Key Points: Permit to work Warning tag and danger tag Lock and key Lockout and tag-out working flow chart Live work Warning signs and posters * To use electrical equipment and tools, normally there are three hazards: Electric shock, Fire and Explosion. Improper use the electric tools is one of the major cause to result in accident and get persons injuries, death and damage to the property. Key Points: Tools inspection Comply with Notice and specification Protect cables from knots, kinks. Disconnect power when not in use Store tools carefully Repair and maintain properly. * Confined space is defined: 1. It is not designed as a workplace. 2. It has the restricted means of entry and exit. 3. It has dangerous atmosphere. Such as: Sino, Storage Tank, Drain, Sewer, Piping Line, Pit, Trench, Boilers Furnaces, Process Vessel, Manhole and Trench. Working in confined space is one of the major reasons to cause death in construction. Key Points: Job Hazard assessment Permit to work Trained and competent personnel Trained confined space watch Gas detection Equipmen