毕业设计某中学教学楼设计.docVIP

华 中 科 技 大 学 土木工程与力学学院 毕业设计计算书 题目： 某中学教学楼设计 系 别： 建筑工程系 专 业： 土木工程 班 级： 学生姓名： 学 号： 指导教师： 完成日期： 摘 要 华中科技大学土木工程专业200级毕业设计“某学教学楼设计”计算书。教学楼为五层现浇钢筋混凝土框架结构。长m，宽m，高m。7度设防，场地为二类，为三级抗震框架，基础采用柱下钢筋混凝土独立基础。 在“建筑设计”部分中，最终建筑方案，确定其具体建筑构造、材料。 在“结构设计”部分中，首先选择一榀框架，其计算简图与各个计算参数；然后根据建筑做法确定其所受荷载，计算梁、柱、板与基础的内力；最后分别进行各构件的配筋计算。 进行PKPM电算，以保证计算成果的可靠性。关键字：毕业设计，教学楼，框架Abstract The topic of HUST CE 2005 class graduation design is the design for the teaching building of a middle school. The main content of the calculation book includes the architecture design and structural design. The teaching building is reinforcement concrete frame with five floors. The length of the architecture is 92.02 m, the width is 16.20 m and the height is 20.6 m. The site intensity is 7 degrees and the yard is classified as second category one group, so the fame is set as triple-stage frame according to coherent standard. The form of foundation chooses isolated foundation under the column. In the part of architecture design, the last architecture design program is decided, at the same time, according to the program you can choose the constructional details and determine the architecture materials. In the part of structural design, first, a transverse frame is chosen to calculate by hand, and then the calculation picture and some parameters can be determined; second, you should calculate the load condition subject to the frame, and calculate the force in the beam, column, board and foundation; at last, the condition of reinforcing of the component of frame can be determined. In the last part of calculation book, PKPM is used to check the hand computation，then the results of hang computation and zooming is compared to each other, at last, some simple amylases are tried to explain the differences. Keyword: graduat