过程能力分析研究.pptVIP

能力分析 Capability Studies 过程能力判断的第一步： SPC 现在我们管理数据的方法 - SPC 应用测试 Applying the Tests 标准偏差的规则:数据应该在哪? 控制极限对规格限制 Control Limits vs. Specification Limits 过程控制极限是在过程中数据自己计算出来的 Process Control Limits are calculated based on data from the process itself 他们根据+/- 3s (99.73%我们期望过程偏差落在这些极限之间) They are based on +/- 3s (99.73% of the process variation is expected to fall between these limits) 两种一般数据 Two General Kinds of Data 属性 ATTRIBUTE - 离散, 可计的数据 Discrete, Counted Data Ex: 1, 2, 3, 4 etc… Good / Bad Machine 1 , 2 , 3 ... 变量VARIABLES - 连续, 可测量的数据 Continuous, Measured Data