机械设计制造及其自动化毕业设计--铸模CAD设计及CAE成型仿真(可编辑)重点.docVIP

机械设计制造及其自动化毕业设计--铸模CAD设计及CAE成型仿真 Support frame Die-Casting Mould CAD / CAE ABSTRACT In this thesis, firstly, the structures of the Support frame die-casting were analyzed. The structure of die casting die was designed through the analysis of various process planning and the calculations of technological parameters of ring gate, bent pin, speed, temperature, pressure, etc. Secondly, the mold parting surface and gating system must be determined. By using 3D PRO/E software, the die-casting model and the mould structure had been drawn. On the basis, the design of die-casting mould structure was