本科毕业（设计）论文-公司密炼机排料口炼胶废气治理的工艺研究与设计.docVIP

设 计 总 说 明 华南轮胎厂投产10多年来，所排放的高含硫量废气，不但对周边农业和林业生产造成很大危害，而且直接影响了周边居民的身体健康。建厂以来, 该厂的污染问题一直成为群众投诉的热点。CS2、H2S等有机无机气体。 本设计根据《中华人民共和国国家标准--大气污染物综合排放标准》（GB16297—1996）对华南橡胶轮胎有限公司橡胶炼胶废气进行处理。 首先，对炼胶废气进行除油处理，避免由于废气中的油类物质的影响，使除尘器的除尘效果下降，甚至导致其不能正常运行工作。 然后，采用袋式除尘器，进一步去除炼胶废气中的尘类物质。除尘器使用脉冲清灰方式，选用DMC-Ⅱ型脉冲袋式除尘器。120°C的低压蒸汽脱附再生。 关键词：炼胶废气，除油器，袋式除尘器，环式吸附器 the General Information of Design The emissions that South China Tire Rubber plant exhausted, which included high level of sulfur, not only cause a great risk to the agricultural and forestry industries nearby, but also affects the surrounding residents of their health directly since 10 years ago. The pollution problem has become the hot spot that people complains since then. In recent years, the environmental protection departments at all levels and the South China Tire Rubber Limited Company, Guangzhou committed to solving air pollution nuisance. The company has built a boiler and rubber exhaust emissions processing system, which has reduced pollution in a certain extent. But the exhaust emissions are still impacting the surrounding environment and the nearby residents there. In rubber tire production process ,mixer produces multi-component emissions, including carbon black dust, rubber granules, rubber dust and other dust components; oil, aromatic oil components and non-methane hydrocarbons, toluene, methanol, methyl mercaptan, CS2, H2S and other organic and inorganic gases. This design is set up to deal with the problem that South China Tire Rubber Plant caused, during the process of wasted air exhausting treatment, according to “The National Standards of Peoples Republic of China -- atmospheric pollutant discharge standards” (GB16297- 1996) First, eliminate the oil from the emissions, avoiding that the effect of the dust collector declines, even it can not operate properly with the oil. Then, use bag filter on the process, and further removed the dust-like substances from the emissions. Bag filter uses pulse filter cleaning met