基于ARMCortex-A8与Android平台的智能家居系统设计毕业论文_new教案.doc

本科毕业设计论文 题 目 基于ARM Cortex-A8与 Android平台的智能家居系统设计 专业名称 电子科学与技术 ___ 学生姓名_______ _ _ _____ 指导教师___________ __________ 毕业时间______ 2015年7月__ ____ 摘 要 ARM CORTEX-A8内核的OMAP3530和Android平台的智能家居系统设计方案。该系统由Android用户控制模块、智能网关模块以及zigbee节点控制模块组成。本系统采用ARM搭建嵌入式网关平台、并带有良好用户操作界面，同时采用 zigbee技术组建家庭无线网络，用户可以远程与家居设备交互。系统硬件部分介绍了各个外设，软件部分由智能网关程序设计、Android 用户控制程序设计以及zigbee节点控制程序设计三部分组成。经试验测试表明，本文设计的系统能很好地满足需求，能够实现对家居设备的系统化、网络化、智能化控制，对智能家居发展具有积极的影响。 关键词： ABSTRACT With the gradual improvement of living standards，and the development of science and technology， peoples quality of life are increasingly high requirements. The rapid development of Internet of Things technology， intelligent home came into being. Smart home through home networking technology to connect various devices together， provide appliance control， lighting control， curtain control， telephone remote control， indoor and outdoor remote control， anti-theft alarm， environmental monitoring， HVAC control， infrared repeater and a programmable timer control and other functions and tools. This paper，aiming the current development of domestic smart home， proposed smart home system design based on the popularity of high-end processor core ARM CORTEX-A8 OMAP3530 and Android platforms. The system consists of Android user control module， intelligent gateway module and zigbee node control module. The system uses the ARM embedded gateway platform to build， and with a good user interface， while using zigbee technology to build a home wireless network， users can remotely interact with the home device. System Hardware section describes each peripherals， software part of the design by an intelligent gateway program， Android users to control programming and Zigbee node control programming of three parts. The test tests show that this design system can satisfy the demands of home devices to achieve systematic， network， intelligent control， with a positive impact on the development of the smart home. KEY WOR