如何建设一个可运营可管理的校园无线网络Partner课件.ppt

* So here is the actual algorithm under the hood to make this happen. First we will identify what clients are dual band capable by listening to the probe responses. If the client is seen to be probing on both bands, we will suppress the response on the 2.4gHz radio. Now there is a bit of a learning curve here, as we need to make sure the client is dual band capable before we block it. Sometimes when you turn the client on for the first time, it might goto 2.4GHz, but after we see it probe for a couple cycles, it’s next association, or roam will be to the 5GHz radio. For 2.4GHz only clients we