操作与配置CiscoIOS设备概要.ppt

第三章操作与配置Cisco IOS设备 Cisco 互连网操作系统(IOS)软件 Cisco设备的简单启动过程 Cisco IOS用户界面的基本特性 Cisco IOS的主要命令模式 Cisco IOS的主要命令模式(续) 登入交换机并键入特权模式密码 显示交换机初始启动的状态 交换机之show running-configuration 命令 交换机之show interfaces命令 配置交换机 配置交换机的各种标识 登入路由器 路由器在特权模式下的命令清单 路由器命令行帮助机制 路由器的上下文相关联帮助 路由器模式一览 用户模式 特权模式 全局配置模式 保存配置 开启或关闭端口 1.2.2 基本的路由器配置 检验基本的路由配置 - 使用 show running-config 命令 - 存储路由器基本配置 copy running-config startup-config- 其他检验路由器的命令:Show running-config – 显示当前随机访问存储器中的配置 Show startup-config – 显示NVRAM 中的配置文件Show IP route – 现实路由表 Show interfaces – 显示所有接口的配置信息 Show IP int brief - 显示接口的简要信息  1.2.2基本的路由器配置 执行基本的编址方案 1.2.2基本的路由器配置 检验基本的路由配置 -使用 show running-config 命令 -存储路由器基本配置 copy running-config startup-config -其他检验路由器的命令: Show running-config – 显示当前随机访问存储器中的配置 Show startup-config – 显示NVRAM中的配置文件 Show IP route – 现实路由表 Show interfaces – 显示所有接口的配置信息 Show IP int brief -显示接口的简要信息 Slide 1 of 1 Purpose: This slide introduce startup process on Cisco routers and switches. Emphasize: Paraphrase or restate the three points and make sure your students follow the description. This description is necessary to keep a common perspective of what is occurring on first the switch and then the router; these three steps should be an anchor to return to as needed. This overview of what happens with Cisco network device start up transitions to the next topic: Where are the sources for configuration software? Slide 1 of 1 Purpose: This slide describe logging in the Cat 1900 switch. Emphasize: Earlier you presented an introduction to the two primary EXEC modes with the slides on Cisco IOS User Interface Fundamentals. Now teach your students about the specifics of the user mode and privileged mode on the Catalyst switch. Note: The default prompt on the Cat 1900 switch is “” and “#”, without the word “switch” in front of the prompt. Transition to an overview of the three major types of switch command-line help facilities. Slide 1 of 1 Purpose: This slide describe three basic show commands on the Cat