德国赛巴TDR实测海底电力电缆波形资料精要.ppt

* * * * * * * * * * VLF Tan DeltaExample connection for compensation termination leakage current Guarding band must be set up in the right position near end far end * * VLF Tan DeltaUser software Measurement screen of the trend from the Tan Delta as function of the voltage, for a programmed sequence with 4 different voltage levels, for phase L1, L2 and L3. Possibility to check differences between phases. * * VLF Tan DeltaFeatures Tan Delta is measured on HV-potential and thus independent of sheath faults or multiple grounding situations. Measurement on PILC with grounded metallic sheath is also possible. Also no need to disconnect the screens From both terminations the leakage current is guarded and subtracted, in case of low Tan Delta values, from the total current which leads to a high accuracy of the Tan Delta. Plausibility check of the voltage is integrated in the software (software checks if voltage level at measurement unit, VLF unit and entered value at control unit are equal). Tan Delta system is available as portable unit or can be integrated in a measurement van. Option to program sequences, with up to 6 different voltage levels and adjustable measurement times. Combination of Vario and VLF CR-60-25μF for Con Edison New York in 2002 Product overview VLF CR technology Test van solutions (c) SebaKMT , all rights reserved * Connection Technology Vehicle installation (c) SebaKMT , all rights reserved (c) SebaKMT , all rights reserved * Features and benefits of the VLF 60 / 25 μF Con Ed – VLF 60/25 is a unique proper testing system for: MV cables up to 80 km (1-ph. Test with 30 kV copper cable) or MV cables up to 26 km, (3-ph. test simultaneously) Cables with high capacitance, e. g. due to their large diameter,… Cables that are badly accessable Cables which have no redundance Now 10 years of experiences with Con Ed – test systems: 10 years of comprehensive testing has reduced the failure rate in the power networks significantly First