毕业论文答辩稿精要.docVIP

毕业 论 文 课题名称 系/专 业 机械工程系/机电一体化 班 级 机 电 学 号 学生姓名 指导教师： 2014 年 5 月 日 工业生产过程中，经常需要测量或控制气体，液体，蒸汽等介质的流动，所以可以正确指导生产操作，以确保设备的正常运行，确保安全和质量的生产。 流量仪表检测仪器。 从气体，从正常工作条件下的大气温度，高温，高压或超低温度，低压力的状态。 Abstract Flow is the industrial production process to guide the production, operation, monitoring equipment operation, to ensure that important parameters based on production safety, but also carry out pipeline transportation business, to achieve the important parameters based on economic accounting. Structure type flow measurement instrumentation is up to the application and study of history is long, one meter wide range of applications. Industrial production process, often need to measure or control the flow of gas, liquid, steam and other media, so you can properly guide the production operations to ensure the normal operation of the equipment to ensure the safety and quality of production. Flow measurement is an important basis for custody transfer process parameters indispensable. Flow meter position detection instrument has not be underestimated. Science continues to develop, produce progress, the pursuit of precision flow measurement has become higher, and media types to be measured more widely, from simple single-phase gas and liquid, and now multiphase media from ambient temperature under normal operating conditions, has been developed to a high temperature, high pressure or ultra-low temperature, low pressure state. In order to meet production needs, using a variety of works, using a variety of media, and the superior performance of the new smart meter constantly being created, flow instrumentation instrumentation has become the most important class of instruments. In this graduation design, my theme is the use and maintenance of the meter (this thesis ROSEMOUNT differential pressure flowmeter prototype), I will talk about its development, structural principles, use, installation, maintenance, and key about the use