塑料件设计指导《PlasticDesignGuide》教程解读.ppt

Weld Line Strength Gate Weld Line Gate Weld Line Strength Weld Line Improved Design Sinks Ribs and Sinks Sinks Ribs and Sinks 0.5 T (max. 0.75T) R max. 0.5T better D 2 T T R = T D should be improved 1 Sink mark 3T Sinks Improved Sinks Grained or Stippled Surface Tooled Depression Offset at Rib Sink Sinks Ribs Design Better Best should be improved Good Design, Strength Good Design, Strength 1X 1.5X 13.3X 27X 30X Relative Torsional Stiffness Bad Good Design, Example Bad Good Design, Example Bad Good Design, Example Bad Good Design, Example Bad Good Desi