Photoshop提升您的广告设计与三维飞溅.docVIP

第1步 Lets first take a look at the image were creating.让我们先来看看我们的形象创造。 Click the screenshot below to view the full-size image.单击下面的截图中，以查看完整大小的图片。 As always, the full Photoshop file is available via our PSDTUTS Plus membership .一如往常，充分Photoshop档案可通过我们的PSDTUTS加籍 。 Step 2第2步 We need three boat photos taken from a high view.我们需要三个船照片从一个高的观点。 For this tutorial, you can substitute boats with cars, shoes, or anything else.对于本教程，您也可以替换艘汽车，鞋，或其他任何。 Step 3第3步 Start to throw the paint from a cut plastic bottle.开始把油漆从削减塑料瓶。 You can do it in front of a white wall or a green screen (if you have it) to obtain a good contrast on the edges of the splashes.你可以在一个白色的墙壁或绿色屏幕（如果有的话） ，取得良好的对比度的边缘飞溅。 The results will show better if you mix water and paint together.结果将显示更好如果你混用不同的水和油漆在一起。 Be forewarned, stay away from the paint.得到预警，远离油漆。 In this attempt, we lost a cashmere pullover and a watch—irremediably stained.在这种尝试，我们失去了一个羊绒套衫和手表，无可挽回地染色。 Step 4第4步 Select the best splashes you photographed.选择最好的飞溅你拍照。 If some parts of the paint are out of focus, dont worry.如果一些地方的油漆都已经集中，请不要担心。 Its a fine effect and it will contribute to a sense of depth in the final result.这是一个很好的影响和这将有助于深入感的最后结果。 Step 5第5步 Use the Rapid Selection Tool or Magic Wand Tool to select the white background around the splashes.使用快速选择工具或魔术棒工具选择白色背景的飞溅。 After you complete the selection process, go to SelectRefineEdge and make some adjustments.在您完成甄选过程中，去选择“优化” Edge和作一些调整。 Add Feather, Radius, and Expand or Reduce the selection until you find a nice result.添加羽毛，半径，扩大或减少的选择，直到找到一个不错的结果。 Use a black background to remove excess white pixels on the edges.使用黑色背景，以消除多余的白色像素的边缘。 After that, go to LayerLayer MaskReveal Selection to hide the white background.在此之后，去层“图层蒙版”显示隐藏选择白色背景。 Step 6第6步 For each splash you need to repeat Step 5 and duplicate the layer every time.对于每一个醒目你需要重复步骤5和重复层每次。 At the end, you may have a multilayer file like the image below.最后，你可能有多层的文件，如以下图片。 Step 7第7步 Now switch off every Paint layer so we