西门子贴片机常见错误及解决方法.docVIP

1 The Most Frequent Error Messages Involving the Revolver Head（包括旋转轴在内的经常性错误） 1.1 0008 RV/D axis: target position not reached（目标位置未到达） In case of errors on only one segment: 1 Cause: Sleeve, segment or incremental disk is contaminated; sleeve turns sluggishly in the segment. 原因：吸嘴光栅盘，段或增加的盘站被污染，吸嘴光栅盘在盘站上旋转缓慢。 Remedy: Exchange sleeve for one that has been cleaned and clean the segment. 方法：将已经清洁干净的重新换上。 In case of errors on a number of segments: Cause: O-ring of DP-station defective or contaminated 原因：DP轴上的O形圈被污染或有损坏； Remedy: Clean or, if necessary, exchange O-ring of the DP-station 1 方法：