西华大学前沿讲座解决方案.doc

前 沿 讲 座 题 目: 开放式数控系统 学 生 姓 名: 曾印权 学 号: 312011081102225 年级/专业/班: 2011级 机设 2 班 学院(直属系) : 机械工程学院 开放式数控系统 摘要：随着计算机系统的发展，特别是网络技术的发展，CIMS的实现形式将从大型主计算机和大规模数据库为中心的集中型，向以个人计算机的小型计算机互相连接、配置成网络的分散发展。其变化不仅拥有技术上的优势，而且更符合实际生产的需要。长期以来数控设备制造企业和机床制造企业是各自独立开发产品的，数控企业不断丰富系统的功能，但在数控机床实际应用中，并不一定需要庞大的系统功能支持。另一方面，机床制造厂和用户有许多经验而这些经验不可能与数控装置的生产厂共享，很难融入到已有的数控系统中去。业生产中机床设备的种类很多，许多机床是直接根据用户的需要设计的。控制器生产企业提供的数控系统大多是全功能的数控系统，数控中的许多参数都需要根据机床的实际情况设定。系统要提供设定参数的接口，以供机床制造企业调整和修改。数控系统提供的全功能，机床制造企业不一定都需要。在这种情况下他们都希望数控系统具有一定的“开放性”，即具有高度模块化的结构，可以重新配置、修改、扩充和改装。Open numerical control system Abstract: with the development of the computer system, especially the development of network technology, the implementation of CIMS will from large main computer and large-scale centralized database as the center, to small computer connected to each other, the configuration of the personal computer into a network of diversification development.The change is not only have technological advantages, and conforms to the actual production needs.Long nc equipment manufacturing enterprises and machine tool manufacturing enterprise is develop products independently, numerical control functions of the system of enterprise constantly enrich, but in actual application of the numerical control machine tool, does not necessarily require a lot of support system function.Machine tool manufacturers and users, on the other hand, there are a lot of experience and the experience cant be Shared with the manufacturer of CNC equipment, it is difficult to feed into the existing numerical control system.Many, many different kinds of industry in the production of machine tool equipment, machine tool is designed according to the needs of users.Controller manufacturing enterprises to provide most of the numerical control system is a full-featured CNC system, CNC of many parameters need to be set according to the actual situation of machine tool.System to provide the interface to set param