110_3510KV变电站电气部分初步设计.docVIP

摘 要 随着科学技术的发展，网络技术的普及，数字化技术成为当今科学技术发展的前沿，变电站数字化对进一步提升变电站综合自动化水平将起到极大促进作用，是未来变电站建设的发展方向。基于这种发展的需求，该变电站采用EDCS-6200型110kV变电站综合自动化。利用数字化技术来解决目前综合自动化变电站存在的问题已成为可能。本变电站就是利用数字化技术使变电站的信息采集、传输、处理、输出过程全部数字化，并使通信网络化、模型和通信协议统一化、设备智能化、运行管理自动化。 通过本次设计，学习了设计的基本方法，巩固三年以来学过的知识，培养独立分析问题的能力，而且加深对变电站的全面了解。 关键词 主接线，短路电流，电气设备，主变保护，配电装置，EDCS-6200Abstract Along with the science and technology development, the networking popularization,the digitized technology will become now the science and technology development the front, the transformer substation digitization to further promotes the transformer substation synthesis automation level to get up to the limit the big promoter action, is the future transformer substation construction development direction.Based on this kind of development demand, this transformer substation uses EDCS-6200 the 110kV transformer substation synthesis automation.Solves at present using the digitized technology to synthesize the automated transformer substation existence the question possibly to become.This transformer substation is causes the transformer substation using the digitized technology information gathering, the transmission, processing, the output process to digitize completely, and causes the correspondence network, the model and communication protocol unitizing, the equipment intellectualization, the movement management automation. Through this design, has studied the design essential method, since the consolidated four years have studied the knowledge, raises the independent analysis question ability, moreover deepens to the transformer substation comprehensive understanding. Key words Main wiring, Short-circuit current, Electrical equipment, The host changes the protection, Power distribution equipment,EDCS-6200 目 录 绪论 1 第1章 变电站电气主接线设计及主变压器的选择 1 1.1 主接线的设计原则和要求 1 1.1.1 主接线的设计原则 1 1.1.2 主接线设计的基本要求 1 1.2 主接线的设计 2 1.2.1 设计步骤 2 1.2.2 初步方案设计 2 1.2.3 最优方案确定 3 1.3 主变压器的选择 4 1.3.1 主变压器台数的选择 4 1.3.2 主变压器型式的选择 4 1.3.3 主变压器容量的选择 5 1.3.4 主